unable to install device configuration in Codesys for RevPi DIO Module

Manikandan_pilz · Post by **Manikandan_pilz** » 17 May 2022, 12:36

Hi,
I have a Project with Revi-connect , in my project i do have a RevPI DIO Module, I am Unable to install the ReviPI DIO Module device files in Codesys environment.
Please advice me the right approach. Please do refer the attachment for more info.

Best Regards,
Mani

u.biakoup · Post by **u.biakoup** » 19 May 2022, 10:38

Hello Mani,
please make sure that the new Codesys Runtime V3.5 SP18 is not compatible with the Revolution Pi Library for Codesys (version 1.2.0.0) to download here: https://revolutionpi.de/download/9721/. Our team is currently working on this issue. An earlier version like CODESYS 3.5 SP17 (64 Bit) must be suitable. If you are using Codesys Runtime V3.5 SP18, you need to go back to V3.5 SP17.

Please follow the step exactly like it’s mentioned here: https://revolutionpi.de/tutorials/quick-start-2/

What I can also recommand are the following steps:

Reinstall the Codesys runtime environment on RevolutionPi Connect : -->https://revolutionpi.com/tutorials/code ... rect=en_US

Check the configured gateway in the Devices->Communication Settings tab.

Click Scan Network and select the RevPi Codesys device found and click the OK button.

The first time you log in, you will be asked again to configure username and password

Please use this link to download this component:

CODESYS Control for Raspberry Pi MC SL 4.2.0.0 https://store.codesys.com/codesys-contr ... mc-sl.html
Revolution Pi Library for CODESYS, V1.2.0.0 zur Integration von Revolution Pi in CODESYS : https://revolutionpi.de/download/9721/

For further questions, please feel free to contact us.
Kind regard

Manikandan_pilz · Post by **Manikandan_pilz** » 26 May 2022, 10:58

Hi,

Thanks for the recommendations, it's worked.
It's due to the version issue.

Best Regards,
Mani