The Industrial Raspberry Pi Forum

Hi,

I have an issue with the communication between the Revolution Pi and some inverters of Siemens Sinamics V20. I made the connection of the image below and test with the pc (Software - Modbus Poll). Everything works fine between Sinamics -> Conversor RS485 to USB -> PC as you can see in the image. Now i connected and configured the Revolution Pi as a master but don't receive any data. I use the same configuration of the modbus poll:
9600 bps
8 Data Bits
Parity None
2 Stop Bits
When i insert the order "Modbus_Action_Status" I receive the message "1 Byte-Value of Modbus_Action_Status: 255 dez (=ff hex) and i think i should receive something like "...0 dez/...1 dez". Anyone can help?

Hi joao.pires,

welcome to our community! Thanks for the detailed description of your setup and the problem.

Could you please share your configuration of the actions in the extended data (right click on your modbus master in pictory)?
Did you reset the driver after changing your configuration?
Is there any change if you manually restart the modbus master (sudo systemctl restart pimodbus-master.service)?

Nicolai

Yes, this is my configuration od the actions: I already made the reset driver but the issue persist.

nicolaiB wrote: ↑18 Nov 2021, 17:09 Is there any change if you manually restart the modbus master (sudo systemctl restart pimodbus-master.service)?

Have you tested the restart?

Nicolai

Yes i try the restart but the issue still the same

Hi joao.pires,

can you please share the output of the modbus log file with the following command:

Nicolai

Hi Nicolai
This is the results of the command.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.11.22 09:56:53 =~=~=~=~=~=~=~=~=~=~=~=
login as: pi
pi@172.31.4.99's password:
Linux RevPi100300 4.19.95-rt38-v7 #1 SMP PREEMPT RT Tue, 22 Jun 2021 14:13:31 +0000 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon Nov 22 09:55:35 2021 from 172.31.4.71

]0;pi@RevPi100300: ~[01;32mpi@RevPi100300[00m:[01;34m~ $[00m journalctl -u pimodbus-master.service | tail -n 50
[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[19PpiTest -r Modbus_Action_Status_1[2PMaster_Status
1 Byte-Value of Modbus_Master_Status: 255 dez (=ff hex)
1 Byte-Value of Modbus_Master_Status: 255 dez (=ff hex)
^C
]0;pi@RevPi100300: ~[01;32mpi@RevPi100300[00m:[01;34m~ $[00m piTest -r Modbus_Master_Status
[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[Cjournalctl -u pimodbus-master.service | tail -n 50
[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[19PpiTest -r Modbus_Action_Status_1
1 Byte-Value of Modbus_Action_Status_1: 255 dez (=ff hex)
1 Byte-Value of Modbus_Action_Status_1: 255 dez (=ff hex)
^C
]0;pi@RevPi100300: ~[01;32mpi@RevPi100300[00m:[01;34m~ $[00m piTest -r Modbus_Action_Status_1[2PMaster_Status
[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[C[Cjournalctl -u pimodbus-master.service | tail -n 50
-- Logs begin at Sat 2021-11-20 18:21:55 WET, end at Mon 2021-11-22 09:57:02 WET. --
Nov 20 18:22:03 RevPi100300 systemd[1]: Started Revolution Pi Modbus master.
Nov 20 18:22:03 RevPi100300 piModbusMaster[1150]: piModbusMaster started
Nov 20 18:22:03 RevPi100300 piModbusMaster[1150]: piModbusMaster: /work/revpi-modbus/src/piConfigParser/piConfigParser.c parse_modbus_master_action_list: Assertion `(actionID > 0) && (actionID < INT32_MAX)' failed.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Main process exited, code=killed, status=6/ABRT
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Failed with result 'signal'.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Service RestartSec=100ms expired, scheduling restart.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Scheduled restart job, restart counter is at 1.
Nov 20 18:22:03 RevPi100300 systemd[1]: Stopped Revolution Pi Modbus master.
Nov 20 18:22:03 RevPi100300 systemd[1]: Started Revolution Pi Modbus master.
Nov 20 18:22:03 RevPi100300 piModbusMaster[1185]: piModbusMaster started
Nov 20 18:22:03 RevPi100300 piModbusMaster[1185]: piModbusMaster: /work/revpi-modbus/src/piConfigParser/piConfigParser.c parse_modbus_master_action_list: Assertion `(actionID > 0) && (actionID < INT32_MAX)' failed.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Main process exited, code=killed, status=6/ABRT
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Failed with result 'signal'.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Service RestartSec=100ms expired, scheduling restart.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Scheduled restart job, restart counter is at 2.
Nov 20 18:22:03 RevPi100300 systemd[1]: Stopped Revolution Pi Modbus master.
Nov 20 18:22:03 RevPi100300 systemd[1]: Started Revolution Pi Modbus master.
Nov 20 18:22:03 RevPi100300 piModbusMaster[1192]: piModbusMaster started
Nov 20 18:22:03 RevPi100300 piModbusMaster[1192]: piModbusMaster: /work/revpi-modbus/src/piConfigParser/piConfigParser.c parse_modbus_master_action_list: Assertion `(actionID > 0) && (actionID < INT32_MAX)' failed.
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Main process exited, code=killed, status=6/ABRT
Nov 20 18:22:03 RevPi100300 systemd[1]: pimodbus-master.service: Failed with result 'signal'.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Service RestartSec=100ms expired, scheduling restart.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Scheduled restart job, restart counter is at 3.
Nov 20 18:22:04 RevPi100300 systemd[1]: Stopped Revolution Pi Modbus master.
Nov 20 18:22:04 RevPi100300 systemd[1]: Started Revolution Pi Modbus master.
Nov 20 18:22:04 RevPi100300 piModbusMaster[1203]: piModbusMaster started
Nov 20 18:22:04 RevPi100300 piModbusMaster[1203]: piModbusMaster: /work/revpi-modbus/src/piConfigParser/piConfigParser.c parse_modbus_master_action_list: Assertion `(actionID > 0) && (actionID < INT32_MAX)' failed.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Main process exited, code=killed, status=6/ABRT
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Failed with result 'signal'.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Service RestartSec=100ms expired, scheduling restart.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Scheduled restart job, restart counter is at 4.
Nov 20 18:22:04 RevPi100300 systemd[1]: Stopped Revolution Pi Modbus master.
Nov 20 18:22:04 RevPi100300 systemd[1]: Started Revolution Pi Modbus master.
Nov 20 18:22:04 RevPi100300 piModbusMaster[1244]: piModbusMaster started
Nov 20 18:22:04 RevPi100300 piModbusMaster[1244]: piModbusMaster: /work/revpi-modbus/src/piConfigParser/piConfigParser.c parse_modbus_master_action_list: Assertion `(actionID > 0) && (actionID < INT32_MAX)' failed.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Main process exited, code=killed, status=6/ABRT
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Failed with result 'signal'.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Service RestartSec=100ms expired, scheduling restart.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Scheduled restart job, restart counter is at 5.
Nov 20 18:22:04 RevPi100300 systemd[1]: Stopped Revolution Pi Modbus master.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Start request repeated too quickly.
Nov 20 18:22:04 RevPi100300 systemd[1]: pimodbus-master.service: Failed with result 'signal'.
Nov 20 18:22:04 RevPi100300 systemd[1]: Failed to start Revolution Pi Modbus master.
]0;pi@RevPi100300: ~[01;32mpi@RevPi100300[00m:[01;34m~ $[00m exit
logout

Looks like there is a problem with your modbus action configuration. Could you please share the file /etc/revpi/config.rsc?

Nicolai

Sorry, i'm a begginer on this. I only can copy this inside the file:

{"App":{"name": "PiCtory", "version": "2.0.3","saveTS": "20211118130027","language": "en","layout": {"north":{"size":70,"initClosed":false,"initHidden":false},"south":{"size":290,"initClos$

How can i copy all the line?

You can copy the whole file with a tools like winscp on to your local machine and then upload it here.

Nicolai